Accessories - Xantrex

Use Genuine Xantrex accessories to complete your installation.

The Automatic Generator Start (AGS) is a Xanbus Enabled device that can automatically activate a generator to provide an MS or RS Inverter/Charger with power to recharge depleted batteries or assist with heavy loads. Compatible with popular generators, the AGS adds intelligence to power management and eliminates time spent monitoring batteries and inverter loads.

The AGS can be customized to suit each user’s preferences. A user can define whether the generator should be activated by ...
List Price:$247.50
Qty:

More Info

Auxillary Load Module for SWPlus series
	The Auxiliary Load Manager starts and stops auxiliary loads, such as fans and water pumps, based on programmable voltage parameters List Price:$226.80 Qty: More Info

Battery Temperature Sensor for SW,DR,UX&

Xantrex' Battery Temperature Sensor is designed for use with DR and UX Inverters and C Series Charge Controllers. The BTS is standard on SW and PS Inverters.

The BTS mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge controller, which automatically adjusts voltage to ensure full battery charge depending on the ambient temperature of your battery installation.

List Price:$29.23
Qty:

More Info

Battery Temperature Sensor for SW,DR,UX&

Xantrex' Battery Temperature Sensor is designed for use with DR and UX Inverters and C Series Charge Controllers. The BTS is standard on SW and PS Inverters.

List Price:$32.26
Qty:

More Info

Xantrex DC 175 amp DC breaker with Encl.

For safety sake and to meet Electrical Code specifications, you are required to provide a means of disconnection as well as over current protection. This product does both. Available in 250 or 175 amps continuous rating, expandable to include a second inverter as well as auxiliary breakers for solar / wind generators. This product comes in a powder coated metal enclosure designed to give your installation a truly professional look and feel. The large DC breaker is available as a separate item to ...
List Price:$331.63
Qty:

More Info

Xantrex DC 250 amp breaker with Encl.

More Info

Negative/Ground bonding block
	List Price:$75.60 Qty: More Info

Plastic Isolation Block for DCBB
	0 List Price:$13.44 Qty: More Info

DC Negative bus for DCCB-L
	List Price:$154.47 Qty: More Info

DRCB Conduit box for all DR series
	Conduit boxes are available for the SW and DR series inverters. These boxes mount on the ends of the inverter and provide a safe and professional cover for the AC and DC wiring. They are required for installations that must pass electrical inspection. List Price:$151.20 Qty: More Info

DRI Stacking kit for stacking two DR
	The DRI is used to stack two identical DR Inverters in series. This will provide twice the power output in a 3-wire, 120/240 VAC, 60 Hz configuration. The DRI is only available for use with North American DR Inverters. List Price:$85.68 Qty: More Info

Xantrex Echo-Charge for dual batteries

Xantrex’ digital echo~charge is designed to charge auxiliary or starting batteries from an inverter/charger or other charging source with limited voltage drop. The Xantrex echo~charge detects when the battery bank is being charged and directs a portion of the charge current to auxiliary or starting batteries. The maximum charger current offered by echo~charge is limited to 15 amps.

Product Features

15 A maximum charge current

Automatically adjusts for 12 or 24 volt ...
List Price:$131.04
Qty:

More Info

175 amp DC rated breaker
	A 175 amp breaker. Also available in 250 amp. List Price:$196.56 Qty: More Info

250 amp DC rated breaker
	A 1250 amp breaker. Also available in 175 amp. List Price:$196.56 Qty: More Info

Generator Start Relay for SWPlus series

Designed for use with PS Inverters and the SW Plus Inverter/Chargers, the Generator Start Module (GSM) is used to control an external automatic start generator. It is used to start or stop a generator when the batteries can’t support the power loads because they are out of range or the load exceeds a pre-set current level. It can also be used to start and stop the generator at regular intervals.
List Price:$226.80
Qty:

More Info

DC conduit box for Prosine
	List Price:Call for Price More Info

Remote Control for DR Inverters ,100'
	Basic remote on / off push button control with single LED status indicator. Designed for use with PS, DR and UX inverter/chargers, the RC/8 remote control panel can be mounted up to 100' (30 meters) away for convenient status monitoring and on/off inverter activation. List Price:$128.36 Qty: More Info

RC8 Remote control for DR inverters
	Basic remote on / off push button control with single LED status indicator. Designed for use with PS, DR and UX inverter/chargers, the RC/8 remote control panel can be mounted up to 100' (30 meters) away for convenient status monitoring and on/off inverter activation. It is also available with 100' cable for mounting further away. List Price:$110.88 Qty: More Info

Xantrex System Control Panel

The System Control Panel (SCP) features a graphical, backlit LCD screen that displays system configuration and diagnostic information in one central location. Large keypad buttons, an intuitive onscreen menu system, and plain text status messages make it easy to configure and operate. By providing basic controls for other devices connected to the network, the SCP reduces the complexity of separate control panels for each device.

The SCP is Xanbus Enabled and easily connects to MS and ...
List Price:$302.40
Qty:

More Info

SWCA Communication Adapter and software

The SWCA serial communications adapter allows for remote set-up, adjustment, troubleshooting and monitoring of up to eight SW or PS series inverters from a personal computer. The package includes the adapter, DOS based software, 25' (7.6 m) of cable and a DB9 connector. Connection to the SWCA can be via 4 conductor phone type cable or with standard PC modems over telephone line.
List Price:$226.80
Qty:

More Info

Conduit box for all SW series
	Conduit boxes are available for the SW and DR series inverters. These boxes mount on the ends of the inverter and provide a safe and professional cover for the AC and DC wiring. They are required for installations that must pass electrical inspection. List Price:$136.08 Qty: More Info

SWI Stacking kit for stacking two SW inv
	The SW Interface is used to stack two identical SW or PS Inverters in series. This will provide twice the power output in a 3-wire, 120/240 VAC, 60 Hz configuration, The SWI is only available for use with North American SW and PS inverters. List Price:$45.36 Qty: More Info

SWI/PAR Sine Wave paralleling kit.
	The SWI/PAR is used to connect two identical SW or PS Inverters in parallel to produce twice the output power at 120 VAC. List Price:$448.56 Qty: More Info

AC conduit box for SW Plus, small
	The ACCB connects to the AC side of a SW Plus Series inverter and accepts AC conduit runs. It protects the cable connections to the inverter and provides an inverter by-pass (for a single AC source) and AC disconnect breakers. Additional circuit breakers may be added to the ACCB. List Price:$403.20 Qty: More Info

AC conduit box for SW Plus, large
	The ACCB connects to the AC side of a SW Plus Series inverter and accepts AC conduit runs. It protects the cable connections to the inverter and provides an inverter by-pass (for a single AC source) and AC disconnect breakers. List Price:$554.40 Qty: More Info

AC bypass assy for 2 inv
	AC bypass breaker assembly for use with two inverters. List Price:$151.20 Qty: More Info

60A breaker for DCCB-L
	List Price:$65.00 Qty: More Info

DC conduit box for SW Plus, 175A breaker
	The DCCB for the SW Plus Series connects to the DC side of the inverter and accepts DC conduit runs. The DCCB provides protection to the DC cables connected to the inverter. Knockouts are provided for 1/2", 3/4" and 2" sizes. With 175 amp Breaker List Price:$705.60 Qty: More Info

DC conduit box for SW Plus, 250A breaker
	The DCCB for the SW Plus Series connects to the DC side of the inverter and accepts DC conduit runs. The DCCB provides protection to the DC cables connected to the inverter. Knockouts are provided for 1/2", 3/4" and 2" sizes. With 250 amp Breaker. List Price:$705.60 Qty: More Info

SWPlus Inverter Communications Adapter

More Info

	Systems
	Solar Thermal
	Photovoltaic
	Wind
	Microhydro
	Inverters
	Batteries
	Battery Chargers
	Generators
	Balance of Systems
	Pumps
	Appliances
	Books and Education

Energy Alternatives - Your Source for Environmentally Friendly Energy

Accessories - Xantrex

Search

Categories