When batteries age and/or spend too much time in a discharged or abused state, sulphite crystals can form on the battery plates which impede the flow of electricity. This is the main cause of poor battery performance. It uses a sharp pulse of current forced into the battery suddenly to “jar” the sulphite crystals and cause internal resonances, both mechanical and electrical, to grind down the sulphite crystals that form so they can be re-combined into the battery acid.
Features
- Single unit 12 to 48 V nominal systems
- Adjustable pulse strength
- 0.0 Amp pulse to 10 amp pulse
- LED to indicate unit operating
- LED to indicate relative strength of battery
- Adjustable on/off voltage
- Can be adjusted to only operate when battery is near full.
- EXTREMELY low draw
Electrical Specifications
- Base Model: BD-2
- Nominal battery voltages (V) 12 - 48 V DC
- Maximum Input (V) 63 V DC
- Maximum Pulse Current(A) 10 amps
- Range of Pulse Current 0.0 Amps to 10 amps
- Adjustable with small screwdriver
- Range of On/Off Control 0 V to 70 V
- Adjustable with Voltmeter and small screwdriver
- Self Consumption < 0.05 ma from battery at full pulse
- Effeciency >96% over 20% pulse load
User Controls
- Pulse Current Magnitude
- On/Off Voltage
- LED Indicators
- Unit Operating
Mechanical Specifications
- Weight:
- 0.3 lbs.
- Size:
3" X 2" X 1.5"
Connections:
- Power #16 AWG Flying Leads
Operating Temperature:
Humidity:
|
(800) 265-8898