The C35 controller is a 3-stage PWM controller. It can operate as a charge controller or a load controller but not at the same time. The C35 can be used in 12V or 24V systems while the C40 can be used in 12V, 24V or 48V systems. C35 controllers can even be used as diversion regulator for hydro and wind systems by sending excess power to an external heating element if the batteries are full. Xantrex also offers an optional battery temperature sensor (15’ or 35’) as well as a very handy digital display that can be used on all 3 C-Series controllers. This display shows array/load amperage, battery voltage and cumulative amp-hours which is very helpful information to have for monitoring your system’s performance or for doing trouble shooting. This display can be mounted directly on the face of the C-Series controllers or 50’ to 100’ away with the appropriate cable. The Xantrex C35 controller features a 2 year warranty. The C35, C40 and C60 controllers have been the workhorse in the controller market for many years making them our top pick in medium to high capacity PWM controllers. The C35 is a fully solid state, microprocessor-driven controller and is UL and cUL listed.
Product Features
- Ensures your batteries are always charged
- Silent, pulse width modulated microprocessor control (maximizing battery life)
- Field adjustable voltage and battery set points
- Electronic protection against short-circuit, overload, over temperature and reverse polarity conditions
|
(800) 265-8898