The Trace DR1524 Modified Sine Wave Inverter offers 1500 continuous with 24 VDC input. It has a surge rating of 3300 watts and has a 70 amp charger and 30 amp AC transfer relay. By converting 24-volt power to clean AC, the DR1524 can run most common tools and appliances, including microwaves, refrigerators, hand tools, televisions and computers. Built-in, automatic, three-stage battery-charging system (bulk, absorption, and float). LED status indicators show charge mode, high or low battery voltage, and over temperature or over load. Maximum charge rate is 70 amps.
A battery temperature sensor (BTS) ensures more precise battery charging. With a wall-mountable remote control panel (RC8) the inverter can be controlled from a convenient location. And a conduit box (DRCB) covers DC input wires.
Features
- Quiet, high efficiency operation.
- Front panel LED indicators and adjustable switch selectors.
- Selectable settings for flooded lead acid, gel, or absorbed glass mat (AGM) batteries.
- Three-stage battery charging (bulk, absorption, and float) for increased performance.
- Low battery, overload, and high battery, over temperature protection circuitry.
- Fast switching (grid to battery and battery to grid) for backup power.
- Low idle current (less than one watt) conserves energy when no loads are present.
- Generator compatible.
Options
- Remote battery temperature sensor (BTS) increases battery performance and life.
- Remote control and status indicator (RC8) allows you to view system status remotely.
- Side mount conduit box (DRCB) makes code-compliant DC wiring connections convenient.
- DRI stacking interface for 120/240 volt operation. Requires two units.
|
(800) 265-8898