The Trace DR2424 modified sine wave 24 VDC inverter provides up to 2400 continuous watts with 6200 watts of surge capacity. It has a 240 amp charger and a 30 amp AC transfer relay. This hard working inverter runs common tools and kitchen appliances without a worry. Its high-surge capacity gives it the ability to start difficult motor loads. Once the unit is set up all functions of the inverter/charger are fully automatic. LED status indicators provide vital information such as charge mode, high or load battery voltage, over temperature or overload.
Features
- Quiet, high efficiency operation.
- Front panel LED indicators and adjustable switch selectors.
- Selectable settings for flooded lead acid, gel, or absorbed glass mat (AGM) batteries.
- Three-stage battery charging (bulk, absorption, and float) for increased performance.
- Low battery, overload, and high battery, over temperature protection circuitry.
- Fast switching (grid to battery and battery to grid) for backup power.
- Low idle current (less than one watt) conserves energy when no loads are present.
- Generator compatible.
Options
- Remote battery temperature sensor (BTS) increases battery performance and life.
- Remote control and status indicator (RC8) allows you to view system status remotely.
- Side mount conduit box (DRCB) makes code-compliant DC wiring connections convenient.
- DRI stacking interface for 120/240 volt operation. Requires two units.
|
(800) 265-8898